เครื่องวอร์คกี้วางสินค้ามีตุ้มน้ำหนัก

FORKLIFT WALKIE

Walkie Counterbalanced Stackers

If you are looking for a solution to a current problem, please visit

FX series: Compact and easy operation with an excellent functionality.
Various Lineup from 600Kg to 1.5ton.(1500Kg)

A small walkie type that can load/unloaded goods from trucks, load onto shelves, move, and stack goods.
While walking, start, drive and control are electrically powered by the on-board battery. Achieving powerful and smooth operation. Comfortable operation by centralized operation at hand and the operability manipulated freely and supporting the site with excellent safety to prevent accidents.

Electric drive

Electric lift

Loading 600/900Kg

FX6/FX9-series

Just the right load capacity and size.
Utility type that can be adapted to various usage.

FX6ST

Maximum load 600kg

Lifting height 30~1500mm

FX6WT

Maximum load 600kg

Lifting height 30~2480mm

FX9ST

Maximum load 900kg

Lifting height 30~1530mm

FX9WT

Maximum load 900kg

Lifting height 30~2480mm

Almost maintenance-free AC motor drive system.

Since no motor brush is used, it is almost maintenance-free. Smooth and powerful driving is possible, and almost no operating noise is generated during driving.

Low-speed rotation is possible to improve work efficiency in narrow spaces.

Even if the work space is small, low-speed turning is possible for easy direction changes. Able to turn in a small radius, realizing light work. Increasing warehouse storage rate and work efficiency.

Pinch accident prevention switch

Pinch accident prevention switch

Pinch accident prevention switch reverses the direction of drive if the operator is caught in a wall, goods, etc. Adopting large button and prepare for emergency situation.

Easy to use centralized operation

Easy to use centralized operation

All the driving and lifting switches are concentrated at handle. Adopting a fingertip lever touch knob system makes the work operate easily while holding the handle.

Easy to use handle design

Easy to use handle design

Adopting a handle design, easy to operate in any driving or breaking position. Operation without discomfort is possible and driving is safer.

cord retractable charger

cord retractable charger

It can be charged with AC100V power supply. Automatic charger that can charge appropriately according to the remaining battery level. Cord storage type that can be charged anywhere.

All models have rubber skirts

All models have rubber skirts

The rubber skirt prevents the toes from getting under the vehicle when walking. Increasing safety while maintaining smooth driving.

Tilt function

Tilt function

To increase safety during transportation and prevent the pallet from falling, the forks can be tilted slightly backward.

Easy to inspect

Easy to inspect

Adopting a fully open cover. Easy to see and to maintain.

AC motor drive system

Since this motor does not use a motor brush this motor can be used almost maintenance free. In addition, the number of contactors is reduced and there is no operating noise during driving. The control is also wide-ranging, and the performance feeling is improved almost stepless.

Point! Improved workability in narrow spaces.

Since you can drive in low speed with steering wheel upright, you can change direction with a small turning radius even in a narrow place.

  • If you turn the accelerator knob with pressing the break release button, you can operate at low speed.

Option
  • Chime for forwarding
  • Back buzzer
  • Change fork length
  • Fork extension sleeve
  • Limit switch for control lifting height
  • Step
  • Jib Crane
  • Change the lifting height
  • Without a tilt function
  • Change of carry edge and Fork overall width

(Please contact for other modifications)

Load curve
FX6/FX9-series Load curve
Dimensions
FX6/FX9-series Dimensions
Specifications
Model Unit FX6ST FX6WT FX9ST FX9WT
Maximum load kg 600 900
Load centerLC mm 400
Lifting heightFH mm 30~1500 30~2480 30~1530 30~2480
Backward tilt angleθ deg 5
Lifting speed Laden mm/sec 110 95
Unladen mm/sec 160
Driving speed Laden km/h 3.6 3.4
Unladen km/h 4.0
Minimum turning radiusR mm 1150 1295
Overall lengthL mm 2060 2210
Overall widthW mm 870
Overall heightH mm 1960 1725 1975 1725
Overall heightCH mm 2055 3035 2085 3035
WheelbaseWB mm 900 1050
Fork lengthFL mm 850
Fork overall widthFW mm 635~200
Single fork widthF mm 80
Weight kg 870 930 965 1025
Drive wheel mm φ270×101(Made of urethane)×1
Load wheel mm φ150×65(Made of urethane)×2
Battery voltage V 24
Battery capacity Ah/5HR 65 100
Charger Stationary Automatic Type
Drive Motor W 1200
Drive control AC control
Hydraulic Motor W 2200
Hydraulic control W Lever Control
Perpendicular Stowage Passage
(when using 1100×1100mm pallet)
mm 2600 2750

Electric drive

Electric lift

Loading 1500Kg

FX15WT

Lightly lifting and moving goods more than 1 ton.
Small turn design that helps lift and lower for indoors works.
Flagship model of KOLEC WAKI counter fork lift.

FX15WT

Maximum load 1500kg

Lifting height 35~2500mm

Achieves overwhelming compactness among the same size

Powerful for moving heavy loads. Electric cleanness and compact size make this model useful for indoor work. Powerful support for indoor and outdoor work.

High-power type with fulfilling functions and equipment.

Equipped with fulfilling functions such as power steering that allows light steering operation, speed control function for turning in consideration of small turn and safety.

Pinch accident prevention switch

Pinch accident prevention switch

Pinch accident prevention switch reverses the direction of drive if the operator is caught in a wall, goods, etc. Adopting large button and prepare for emergency situation.

Easy to use centralized operation

Easy to use centralized operation

All the driving and lifting switches are concentrated at handle. Adopting a fingertip lever touch knob system makes the work operate easily while holding the handle.

Handle shape for ease of use.

Handle shape for ease of use.

Shaped to make driving safer and less stressful. Women can use this model with confidence.

All models have rubber skirts

All models have rubber skirts

The rubber skirt prevents the toes from getting under the vehicle when walking.

All models have rubber skirts

Tilt function

Forks can be tilted slightly backward to prevent goods from falling.

Tilt function

Operation section on the unit.

Large, easy-to-press emergency stop button, power key, an hour meter and a battery discharge meter are provided.

AC motor drive system

Since this motor does not use a motor brush this motor can be used almost maintenance free.
In addition, the number of contactors is reduced and there is no operating noise during driving.
The control is also wide-ranging, and the performance feeling is improved almost stepless.

Point! Improved workability in narrow spaces.

Since you can drive in low speed with steering wheel upright, you can change direction with a small turning radius even in a narrow place.

  • If you turn the accelerator knob with pressing the break release button, you can operate at low speed.

Option[FX15WT:Specification change of carry edge and Fork overall width]

You can choose the change of carry edge and Fork overall width
Choose from 4 types
  • Fork overall width: 1030mm~670mm Maximum load: 1300kg/LC500mm
  • Fork overall width: 930mm~570mm Maximum load: 1300kg/LC500mm
  • Fork overall width: 830mm~470mm Maximum load: 1300kg/LC500mm
  • Fork overall width: 730mm~370mm Maximum load: 1300kg/LC500mm

(Example: FX15WT Please contact us for each model.)

Option
  • Chime for forwarding
  • Back buzzer
  • Change fork length
  • Fork extension sleeve
  • Change of carry edge and Fork overall width
Load curve
FX15WT Load curve
Dimensions
FX15WT Dimensions
Specifications
Model Unit FX15WT
Maximum load kg 1500
Load centerLC mm 500
Lifting heightFH mm 35~2500
Backward tilt angleθ deg 5
Lifting speed Laden mm/sec 60
Unladen mm/sec 140
Driving speed Laden km/h 3.2
Unladen km/h 3.8
Minimum turning radiusR mm 1380
Overall lengthL mm 2580
Overall widthW mm 890
Overall heightH mm 1825
Overall heightCH mm 3055
WheelbaseWB mm 1120
Fork lengthFL mm 1070
Fork overall widthFW mm 630~270
Single fork widthF mm 100
Weight kg 1800
Drive wheel mm φ245×100(Made of urethane)×1
Load wheel mm φ150×80(Made of urethane)×2
Battery voltage V 24
Battery capacity Ah/5HR 201
Charger Stationary Automatic Type
Drive Motor W 1700
Drive control AC control
Hydraulic Motor W 2200
Hydraulic control W Knob type chopper control
Perpendicular Stowage Passage
(when using 1100×1100mm pallet)
mm 2900